We use cookies to offer the best possible user experience on our website. We also use third-party cookies, to deliver personalised advertisement messages. By using our website you agree, that cookies can be saved on your device. Further information on the cookies used and on how to disable them can be found here.
 
 

Interoperability of a wide range of devices

Thanks to the myGEKKO device interfaces, you can interconnect several devices, such as the Sonos multiroom system or the BMWi E-Mobil charging station. The systems can be controlled and adjusted in any combination using myGEKKO. This way, they become part of the global domotic system. The device interfaces have been developed in direct collaboration with the respective manufacturers and are constantly updated.

myGEKKO’s device interfaces

Details device interfaces

BMW i.

With the myGEKKO BMWi Wallbox interface you can keep the charging processes of your electric vehicle perfectly under control.

Bring the mobility concept of BMW i into your house and expand it with a variety of attractive possibilities: from time-controlled home functions up to meaningful trend recordings and the charging management of your BMWi.
 
Back to overview
The following models are compatible:
BMW i WALLBOX
BMW i WALLBOX PLUS

Buderus

The myGEKKO Buderus interface allows you to connect a Buderus heat generator to the myGEKKO and use your device for the monitoring and the control.

The system can include a maximum of 4 heating circuits and two water heating systems.
 
Back to overview
The following models are compatible:
Every EMS heat generator since 2003, GB145, GB212, GB162, WPL AR with HMC 300.

Varta

The myGEKKO VARTA interface allows you to connect a VARTA energy storage system to the energy manager of the myGEKKO.

By means of this connection, you can display several energy values, such as daily charging and discharging, as well as trend recordings directly on the mtGEKKO.
 
Back to overview
The following models are compatible:
VARTA family
VARTA home
VARTA element

Pluggit

The Pluggit Avent models are directly integrated in the myGEKKO as device interfaces.

This interface gives you the opportunity to control the ventilation stages with the myGEKKO, monitor several temperatures and values and activate or deactivate Pluggit weekly programs, as well as define customized timers with the myGEKKO.
 
Back to overview
The following models are compatible:
Pluggit Avent P190
Pluggit Avent P310
Pluggit Avent P460

Stiebel Eltron

The myGEKKO Stiebel LWZ/LWA interface allows you to connect integral ventilation systems to the myGEKKO and use your device for the monitoring and the control.

When it is connected to the myGEKKO, the integral ventilation system is switched in day mode and several time schedule programs with setpoints for room temperature, hot water and ventilation stages are controlled by the myGEKKO.
 
Back to overview
The following models are compatible:
Stiebel LWZ 304/404 Integral/SOL (ab BJ 08/2008)
Stiebel LWZ 304/404 SOL
Stiebel LWA 403
Stiebel LWZ 304/404/504 Trend
Stiebel LWZ 504

MYPV

The myGEKKO my-PV interface allows you to connect a heating rod of the type my-PV ELWA-E to the myGEKKO.

With the heating rod the energy surplus produced by the photovoltaic plant can be used directly for the hot water production. In combination with the energy management of the myGEKKO, my-PV represents the ideal solution to make optimum use of the self-produced energy.
 
Back to overview
The following model is compatible:
my-PV ELWA-E

Tecalor

The myGEKKO Tecalor THZ/THD interface allows you to connect the ventilation systems to the myGEKKO and use your device for the monitoring and the control.

When it is connected to the myGEKKO, the integral ventilation system is switched in day mode and several time schedule programs with setpoints for room temperature, hot water and ventilation stages are controlled by the myGEKKO.
 
Back to overview
The following models are compatible:
Tecalor THZ 304, 404 (SOL)
Tecalor THD 400 AL
Tecalor THZ 304 eco, 404 eco
Tecalor THZ 504

E3DC

The myGEKKO E3DC interface allows you to connect an E3DC home power station type S10 and S10 Mini to the energy manager of the myGEKKO.

By means of this connection, you can display several energy values, such as daily charging and discharging, as well as trend recordings directly on the myGEKKO.
 
Back to overview
The following models are compatible:
E3DC type S10
E3DC type S10 Mini

Keba

With the myGEKKO KeContact P30 interface you can keep the charging processes of your electric vehicle perfectly under control.

In addition to the intelligent charging management, myGEKKO also acts as energy manager.
 
Back to overview
The following model is compatible:
KeContact P30 c-series 
KeContact P30 x-series 

Telenot

The myGEKKO Telenot interface allows you to connect the Telenot complex 400, hipley 8400 and hifire 4100 to myGEKKO.

Through myGEKKO, the fuse zones, alarm zones, alarm groups and switching outputs configured in the TELENOT alarm control panel can be controlled, monitored and linked to all systems in myGEKKO OS.
 
Back to overview
The following model is compatible:
complex 400
hiplex 8400
hifire 4100 (Attention only via Modbus)

ekey

The integration of an ekey fingerprint access solution offers many new opportunities to improve security and process the access management.

You have the possibility to realize several functions, from the time-dependent control up to the user-defined door activation and the connection to other systems. 
 
Back to overview
The following models are compatible:
FPD fingerprint reader for door installation
FPD fingerprint reader with RFID for door installation
FIA fingerprint reader for surface installation
FRU fingerprint reader with RFID flush-mounted for 55x55 mounting
FIA fingerprint reader with RFID for surface installation

Elsner Elektronik

With the models P03/3-RS485 or P03/3-Modbus and P04/3-RS485 you can connect two compact Elsner weather stations to the myGEKKO.

The measured values such as precipitation, brightness, twilight and wind are transmitted to the myGEKKO and can be integrated in several systems, e.g. shutters, lights, logics ecc.
 
Back to overview
The following models are compatible:
Elsner P03/03-<modbus basic 30146
Elsner P03/03-RS485 basic 30140
Elsner P04/03-RS485 basic 30154
Elsner P04/03-RS485 GPS 30152
Elsner P04/03-RS485 CET

2N

The connection via Direct Call allows to create a fully functional intercom system in the easiest way.

With Direct Call you can link multiple 2N call stations with multiple myGEKKO indoor stations.
 
Back to overview
The following models are compatible:
2N EntryCom IP Verso
2N EntryCom IP Vario
2N EntryCom IP Force
2N EntryCom IP Uni
2N EntryCom IP Video Kit
2N EntryCom IP Audio Kit

Westaflex

The Westaflex WAC ventilation devices are directly integrated in the myGEKKO as device interfaces.

This interface gives you the opportunity to control the ventilation stages with the myGEKKO, monitor several temperatures and values and define customized timers.
 
Back to overview
The following models are compatible:
Westaflex WAC 350
Westaflex WAC 351

Proxon

The Proxon air heating is directly integrated in the myGEKKO as device interface.

This interface gives you the opportunity to control the ventilation stages with the myGEKKO. The ventilation device is connected to the myGEKKO by means of a bus-bridge and a RS485 interface.
 
Back to overview
The following models are compatible:
FWT series 1
FWT series 2

VOIP

VOIP (Voice over IP) stands for phone service over the network / the internet.

myGEKKO can be used as a VOIP videophone for the communication with other VOIP-capable devices. The main application purpose is the connection of VoIP call stations in order to create an intercom system. 
 
Back to overview

Phoenix Contact

With the myGEKKO Phoenix EV Charge Control interface you can keep the charging processes of your electric vehicle perfectly under control.

Besides the immediate charge, the system also offers the automatic charge in case of overproduction, the mains overcurrent monitoring and the administration of up to 6 vehicles or users.
 
Back to overview
The following model is compatible:
Phoenix EV Charge Control

Thies Clima

The Thies weather stations are directly connected to the myGEKKO via a RS485 interface.

Measured values such as precipitation, brightness, twilight and wind are transmitted to the myGEKKO and can be integrated in several systems, e.g. shutters, lights, logics ecc.
 
Back to overview
The following models are compatible:
Clima Sensor D W 4.9100.00.061
Clima Sensor D WTF 4.9110.00.061
Thies Weather Station Compact WSC11 4.9056.00.000
Thies Weather Station Compact WSC11 4.9056.10.000

Bose

The Bose audio matrix is directly integrated in the myGEKKO as device interface.

Via the myGEKKO, you can distribute several analogue audio sources in up to 8 different rooms. The integrated myGEKKO MP3 player can be used as audio source, too. The music control can be linked with several systems and the respective scenarios.
 
Back to overview
The following model is compatible:
Bose ESP88

RTI

The RTI audio matrix models are directly integrated in the myGEKKO as device interfaces.

Via the myGEKKO, you can distribute several analogue audio sources in up to 8 different rooms. The integrated MP3 player can be used as audio source, too.
 
Back to overview
The following models are compatible:
RTI AD-4
RTI AD-4X
RTI AD-8
RTI AD-8X

Sonos

myGEKKO opens up new possibilities for the control of your Sonos multiroom system.

You can control your Sonos system with the push-buttons, with the myGEKKO Slide as with the myGEKKO WebApp. With myGEKKO you can listen to Sonos playlists, play radiostreams and MP3 files without having to open the Sonos app.
 
Back to overview
The following models are compatible:
Sonos Connect
Sonos Connect:AMP
Sonos Play:1
Sonos Play:3
Sonos Play:5

DoorBird

The DoorBird video intercom is a smart solution for your entrance door, which can be integrated via myGEKKO.

This has a bell push button, an optional camera and provides a high audio and video quality. The IP external station is connected and powered via the RJ45 socket.
 
Back to overview
The following models are compatible:
DoorBird D101
DoorBird D101S
DoorBird D2101V

and more

Falcom

The Falcom GSM module can be directly connected to the myGEKKO using a USB interface.

The GSM module gives you the possibility to send several commands to the myGEKKO or query specific values via SMS.
 
Back to overview
The following model is compatible:
Falcom Samba 75 Integrated Quad Band GSM/GPRS/EDGE Engine

amazon alexa

With the myGEKKO Alexa device interface, you can control your building with your voice.
Lights, blinds, music, heating and many other functions can be operated via Alexa voice control.
 
Back to overview

Mifare

The integration of MIFARE access solutions offers many new possibilities to increase your security and handle access management.
The Mifare card reader is used to detect authorized persons and open doors.
 
Back to overview
The following models are compatible:
All Mifare standard cards (ISO14443 A)

Siemens

Via the device interface a compact and flexible GSM module can be connected to the myGEKKO.
So you have the possibility to send different commands via SMS to the myGEKKO or to query different values via SMS.
 
The following models are compatible:
MC35i

Vaillant

With the myGEKKO Vaillant interface you can now easily integrate Vaillant heat pumps into the myGEKKO OS. Control and check the heating system centrally via myGEKKO. It is also possible to manage several heating systems centrally via myGEKKO.
 
Back to overview
The following models are compatible:
VRC700
VRC720
and only via the Vaillant EEBUS Gateway VR 920 or sensoNET VR 921
Go to the magazine
 
Contacts
contact myGEKKO | Ekon GmbH
 
myGEKKO | Ekon GmbH St. Lorenznerstraße, 2
39031 Brunico
BZ - Italy
tel +39 0474 551 820

contact myGEKKO | EKON Vertriebs GmbH
 
myGEKKO | EKON Vertriebs GmbH Fürstenrieder Straße 279a
81377 Munich
Germany
tel +49 8921 5470710